Groz Surface Marking Block

Groz Surface Marking Block Default Title
Groz Surface Marking Block Default Title

Groz Surface Marking Block

Regular price $121.80
/
  • Secure payments
  • Low stock - 1 item left
  • Inventory on the way

• A fully hardened and ground base which serves as an accurate reference surface. • A machined Vee groove in the base allows the gauge to be used conveniently on curved surfaces. • A Vee groove at the front end allows the spindle to adjust to any angle above or below the base allowing it to be used as a height gauge and also as a depth gauge. • Two retractable pins allow the gauge to be located against the edge of a surface plate or T-slot for linear work. • A 1/4 (6.35 mm) hole in the spring loaded scriber holder allows a dial indicator to be attached conveniently making the gauge useful for checking flatness parallelism heights depths etc. • Grooves on the side of the base allow for comfortable grip. • Well tapered scriber for better sighting while working. • The scriber tip is hardened to 55-60 HRC Base Dimensions: 2-3/16 x 1-5/8 (55 x 40mm) Spindle Length: 7 inch with extra 4 inch spindle (175mm with extra 100mm spindle) Scriber Length: 3 inch (75mm)

• A fully hardened and ground base which serves as an accurate reference surface. • A machined Vee groove in the base allows the gauge to be used conveniently on curved surfaces. • A Vee groove at the front end allows the spindle to adjust to any angle above or below the base allowing it to be used as a height gauge and also as a depth gauge. • Two retractable pins allow the gauge to be located against the edge of a surface plate or T-slot for linear work. • A 1/4 (6.35 mm) hole in the spring loaded scriber holder allows a dial indicator to be attached conveniently making the gauge useful for checking flatness parallelism heights depths etc. • Grooves on the side of the base allow for comfortable grip. • Well tapered scriber for better sighting while working. • The scriber tip is hardened to 55-60 HRC Base Dimensions: 2-3/16 x 1-5/8 (55 x 40mm) Spindle Length: 7 inch with extra 4 inch spindle (175mm with extra 100mm spindle) Scriber Length: 3 inch (75mm)

Flat rate $12.35 except for some heavy or large items. Shipping to be determined at checkout.

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

More from All
TEE-KAY HEAD CHECK COMBUSTION LEAK DETECTOR TEST UNIT
$120.45
Holemaker Bi-Metal Holesaw 100mm Dia.
$39.20
Ehoma Deep Throat Clamp Assy Fixed & Sliding Arm 500mm
$477.30
Ehoma Deep Throat Clamp Rail 800mm
$218.00
ProEquip 280mm / 11in H/Duty Short Arm Riveter Default Title
ProEquip 280mm / 11in H/Duty Short Arm Riveter
$50.10
ProMarine 12-24-32V Bilge Pump Automatic Float Switch (20A) Default Title
ProMarine 12-24-32V Bilge Pump Automatic Float Switch (20A)
$29.80
Recently viewed